Computer Repair in Kendall, FL
When a computer starts freezing, refusing to boot, or dropping Wi Fi at the worst moment, the problem is usually not mysterious. It is physical wear, corrupted system files, a failing drive, unstable memory, overheating, or a software conflict that slowly built up over time. The difference between a quick patch and a lasting fix is a disciplined diagnostic process that identifies the exact fault, protects data when risk is present, and verifies stability after the work is done.
In Kendall, we approach repairs the same way every time: confirm the symptom, isolate the cause, choose the safest correction, then validate stability under real use. At Computer Repair Miamis we do far more than basic PC fixes, including IT support, data recovery, custom PC builds, SSD upgrades for Mac and PC systems, micro soldering, and repair work across a wide range of electronics.
What we repair in Kendall
Laptop and desktop repair
We service laptops and desktops across Windows, macOS, and Linux. That includes systems that will not power on, machines stuck in boot loops, random shutdowns, blue screens, performance drops, overheating, broken ports, and devices that behave normally for a while and then fail under load.
Mac and PC upgrades
Upgrades are not guesswork. We confirm compatibility first, then perform the upgrade and validate it after.
- SSD upgrades and storage migrations for both Mac and PC
- RAM upgrades when the platform supports it and stability can be verified
- Performance improvements focused on real bottlenecks, not generic cleanup steps
- Firmware and BIOS or UEFI configuration when needed for stability and correct device behavior
Operating system installation and reinstalls
When an OS becomes unstable from corruption, driver conflicts, or repeated update failures, the right path may be a repair install or a clean reinstall. We handle planning around data protection, boot configuration, drivers, and post install verification so the system remains stable after it is returned to normal use.
Data recovery and file retrieval
Data loss can come from failing drives, corrupted partitions, accidental deletion, damaged file systems, and computers that will not boot. Our process prioritizes protecting what is recoverable and minimizing risk. Depending on the failure mode, that can include drive imaging, controlled cloning, logical recovery, targeted extraction, or migration to a new drive with integrity checks.
IT support for homes and small businesses
Some issues are not a single repair, they are reliability problems that show up as recurring disruptions. IT support focuses on preventing those disruptions and keeping systems predictable.
- Network troubleshooting for Wi Fi and wired connections, including configuration problems, DNS issues, and driver level faults
- Malware removal and security cleanup, including persistence checks and account security review
- Backup planning and verification for external, cloud, or hybrid approaches
- New device setup, migrations, and workstation readiness for day to day use
- Ongoing performance stabilization when slowdowns return for a specific reason
The goal is a system you can trust, not a temporary improvement that fades a week later.
Custom PC builds and gaming systems
We build custom PCs from scratch and repair existing custom systems that are unstable or underperforming.
- Part selection for compatibility, thermals, and power requirements
- Full assembly and cable management that supports airflow and serviceability
- OS installation, driver setup, and stability validation under real load
- Troubleshooting for crashes, freezes, thermal throttling, and power instability
- Upgrade planning for GPU, CPU, storage, and cooling when it makes practical sense
Custom systems should be measured and validated. They should not rely on trial and error.
Electronics repair and micro soldering
Not every fix is solved by swapping a part or reinstalling software. Many failures require device level work.
Micro soldering and board level repair
Board level issues can cause no power, no charge, unstable operation, intermittent faults, and broken ports that cannot be repaired by simple replacement.
- Connector and port repairs
- Component level replacement when a failed part is identified through diagnosis
- Trace and pad repair after physical damage
- Cleaning and remediation after liquid exposure, followed by verification testing
Broader electronics repair
We work on many types of electronic devices beyond computers, including specialty electronics and equipment where board level troubleshooting and component repair is required. The approach is the same, diagnose precisely, correct the fault, and verify stability.
How diagnosis works
- Symptom confirmation and history review
We verify what happens consistently, what triggers the issue, and what changed recently. - Hardware health checks
We evaluate storage health, memory stability, thermal behavior under load, and power related symptoms before deep software changes. - Software integrity review
We check system logs, update history, driver stack condition, startup behavior, and file system integrity, then target the specific cause. - Data risk assessment
If storage is failing or corruption is present, we prioritize backup, imaging, or recovery steps before repair actions that could increase risk. - Verification after repair
We confirm the fix with reboot cycles, stability testing, and real usage checks relevant to the original problem.
Issues we commonly resolve
Will not power on or will not charge
This can involve battery issues, damaged power paths, failed ports, shorts, or board level faults. The correct fix depends on identifying exactly where the failure begins.
Random restarts, freezing, and crashes
These often trace back to failing RAM, unstable storage, overheating, driver conflicts, or power instability. Proper testing separates those quickly.
Files missing or system will not boot
This can indicate file system corruption or drive failure. The priority is protecting recoverable data first, then deciding on recovery, migration, or rebuild.
Overheating and loud fan behavior
Dust buildup, failing fans, and degraded thermal transfer can cause throttling and shutdowns. We address airflow, cooling performance, and stability under load.
Broken ports and physical damage
Loose jacks, damaged connectors, and cracked solder joints often require device level repair. The goal is electrical reliability and mechanical durability.
What to bring and what to avoid
If possible, bring the device and any power adapter or charger that is used with it. If you have error messages, blue screen codes, or a clear pattern of when the issue occurs, include that as well. If data recovery is important, say so early.
If you suspect a failing drive, avoid repeated boot attempts. In some failure modes, repeated attempts can reduce the odds of successful recovery.
Reliable repair starts with clear diagnosis
Whether the issue is a laptop that will not boot, a desktop that crashes under load, a drive that is putting data at risk, a custom build that will not stabilize, or electronics that need micro soldering, the first step is always the same: confirm the fault, protect anything important, apply the correct repair, and verify the result.
In Kendall, our work is built around stable outcomes. We aim to return equipment in a condition you can rely on, with predictable performance, validated operation, and fewer recurring issues.
